Do It Yourself CDI TCI for single cylinder
Do It Yourself CDI TCI for single cylinder
plus Firmware. On AC-CDI v7.9, DC-CDI v7.9 or DC-CDI v2.1 the tacho output available at RB5/PIN11/TP1 can drive a tachometer. The signal is a +5volts level and 5% Duty Cycle signal: but some tachometers need a +12v level at 50% DutyCycle signal ! In order to work with such tachometers I created a small microprocessor […]
Duty Cycle Converter Read More »
End Of Life EOL also mean: NO SUPPORTYou make it at your own risk. CHARACTERISTICS. DC-CDI Easier start when cold For SINGLE cylinder (and SOME TWO cylinders). Advance curve is in EEPROM and is freely modifiable Rev until 20,000 RPM/330Hz Pickup position can be freely set from 0 to 360° Accurate (0.15°/8000RPM). Need a 6
This Tester is EOL (end of live) and has been replaced by CDI Tester v6.2 Design to simulate pickup at different RPM to test TCI, ACCDI, DCCDI, Tachometers, Power valves and ignition coils. And to extract the advance curve from a Digital TCI or CDI. PICKUP SIMULATION Range 1000 to 24,000RPM in 24 steps.
CDI TESTER v4 and SCOPE Read More »
This Tester is EOL (end of live) Design to simulate pickup at different RPM to test TCI, CDI, Tachometers, Power valves and ignition coils. And to extract the advance curve from a Digital TCI or CDI. SIMULATION Range 1000 to 12000RPM in 12 steps. Simulate a Hall sensor (square +12v signal). Adjustable width from 10
[ARCHIVE] This ACCDI is EOL (end of live) Features AC-CDI For ONE or TWO* cylinders For [2 strokes engines] and for [4 strokes engines with wasted spark*] * On 4stk engines with 1 pickup on the crankshaft, one spark occur at compression stroke and one at exhaust stroke. Firing in the exhaust stroke is a